Builder Coat Emulsion
Builder Coat Emulsion Details
TYPE :-
BUILDER COAT Acrylic Interior | Exterior emulsion is matt finish.
FEATURES :-
BUILDERCOAT Acrylic INTERIOR | EXTERIOR emulsion provides a smooth long lasting rich finish to the INTERIOR & EXTERIOR wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
RECOMMENDED USE :-
BUILDERCOAT Acrylic INTERIOR / EXTERIOR emulsion is INTERIOR / EXTERIOR wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA :-
| COLOURS : | White & other shades |
|---|---|
| FINISH : | Smooth and Matt |
| COVERAGE : | On smooth primer masonry surface by brushing 1 coat: 130-160 sq. ft/ltr 2 coats: 80-90 sq.ft/ltr (It may vary due to factors such as methods and conditions during application and surface roughness etc) |
| DRYING TIME : | Surface drying time – 10-15 minutes |
| GLOSS LEVELS/SHEEN LEVELS : | Matt |
| FLASH POINT (IS101/108 Part 1, Sec 9) : | Non- flammable |
| SUITABILITY OF THINNER PAINT | Use within 24 hrs. |
| SHELF LIFE | 18 months from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. |
PERFORMANCE DATA :-
| ABRASION RESISTANCE : | Excellent |
|---|---|
| WATER RESISTANCE : | Excellent |
| REMARKS : | 1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. 2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. 3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. 4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints. 5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. 6) Do not apply when ambient temperature is less than 10ºC or if the temperature might drop to this level within 4 hrs of application. 7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. 8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning. |
APPLICATION METHOD :-
| Product : | Thinner | Dilution % by Vol | Application Viscosity in Sec | Recoating Period (Hrs) |
|---|---|---|---|---|
| SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
| SAFFRO’s Cement (Water or Solvent based) Wall Primer : | MTO or Water | B- 8-10 S- 15-20 | B-30-40 S-20-25 | 6-8 hrs |
| SAFFRO’s BUILDERCOAT Acrylic INTERIOR EXTERIOR Emulsion by Brush, Spray, Roller : | Water | B-40-60 S-70-75 | B-20-30 S-20-25 | 3-4 hrs |
| (B=Brushing, S=Spraying) | ||||
| N.B. For INTERIOR EXTERIOR purpose we recommended SAFFRO’s WALL PROTECT INTERIOR EXTERIOR Wall Primer. | ||||
| Safety Features : | Non-flammable | |||
| Pack Sizes: | 1 Litre, 4 Litre, 10Litre, 20 Litre. |
Related Products
Ultra- Premium Emulsion
TYPE :-ULTRA PREMIUM weatherproof interior and exterior emulsion is a smooth, water-based, modified acrylic, interior ... Continue
Star Velvet Glow Emulsion
FEATURESIt provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washabl... Continue